Tungsten Disulfide as Solid Lubricating Material
The European Commission has submitted to member states a new draft of sanctions against Russia, including an oil embargo. Some member states that rely heavily on Russian energy sought exemptions.
Western media reported that the European Commission draft of the sixth round of sanctions against Russia includes within six to eight months gradually banning oil imports from Russia, but allowing Hungary and Slovakia to extend the transition period for several months; The Russian Savings bank and other large financial institutions on the sanctions list.
The European Union has imported 44 billion euros of fossil fuels from Russia since Russia launched its special military operation against Ukraine in late February, according to Finland's Energy and Clean Air Research Center.
The Institute for European and Global Economics in Brussels estimates that the European Union currently consumes about $450 million worth of Russian oil a day.
Among EU members, landlocked Hungary and Slovakia, which import most of their oil from Russia, cannot quickly find alternative supplies. Slovakia says the transition will take years. Some officials believe Bulgaria and the Czech Republic may also seek to opt out of oil sanctions against Russia.
Affected by the ever-changing international situation, the supply and prices of international bulk WS2 powder are still very uncertain.
Tungsten disulfide, as a new type of solid lubricating material, its chemical properties are relatively stable. It can adapt to a variety of extremely harsh conditions, to provide maximum wear resistance, rust, and corrosion protection. And it is environmentally friendly, is not toxic, and will not cause harm to human health. It can be widely used in the automotive industry.
Tungsten disulfide has a layered crystal structure. It has excellent lubricity, with a very low friction coefficient, the dynamic friction coefficient is 0.030, and the static friction coefficient is 0.070. It is coated on the surface of automobile parts, can greatly reduce wear, and bite, eliminate or reduce the friction, and wear caused by equipment maintenance, maintenance, and other problems, and improve the working efficiency and service life of automobile parts.
When the engine is running, the temperature is very high, and the pistons are turning back and forth at a very high speed. Operating in such harsh conditions, pistons wear out faster. Because the friction coefficient of tungsten disulfide is small, the parts used for high temperature or heavy load friction can also maintain a lubrication effect. At this point, it is coated on the surface of the piston, which will reduce wear, reduce temperature, and prolong the service life.
The piston ring is the least durable part of the engine. The piston ring rotates with the piston at high speed and is affected by the high temperature and high-pressure gas in the cylinder. The oil is particularly prone to deterioration at high temperatures, so its wear is very serious. With tungsten disulfide, friction is reduced and it is possible to move with the piston at high speed, high pressure, high temperature, and extremely difficult lubrication conditions.
The crankshaft is one of the most important parts of the engine, and its working state is also high-speed rotation, so it must be able to resist wear and fatigue. Journal surface is generally after high-frequency quenching or nitriding treatment, its surface coated with tungsten disulfide and fine grinding, and its wear resistance and fatigue strength will be greatly improved.
The universal joint, steering knuckle, spring steel bushing, front, and rear brake CAM bushing, are relatively difficult to be greased. In frequent operation, the lubricating oil will deteriorate and lose lubrication effect, and tungsten disulfide has excellent mechanical stability and thermal stability, which can well ensure that these parts enjoy lubrication effect and reduce wear.
Tungsten disulfide has excellent compatibility, water erosion resistance, and affinity with most paints, solvents, and fuels. It ensures that there is always a layer of lubrication on the surface of the bearings in the water pump and the silicone fan clutch as well as the helical gears that drive the distributor, so as to protect against rust and corrosion.
With these excellent properties, tungsten disulfide can also be used in the machinery industry, plastic industry, medical equipment industry, as well as military, aerospace, satellite, spacecraft, and other high-tech fields.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tungsten disulfide WS2 powder, please feel free to contact us and send an inquiry. ([email protected])
Prior to the impact of COVID-19 on the chemicals and materials industry and the price of the WS2 powder, many industry observers expected low to flat growth in 2021 in all regions outside Asia, with many countries seeing slower growth compared to recent years. Operational excellence has long been a hallmark of the WS2 powder chemical industry, and many companies are financially able to withstand short-term dips in end-market demand due to rapid leverage from reduced capex on hand.
The analysis shows that, whatever the final course of the pandemic, we can expect the inevitable long-term effects. Workplaces are expected to slowly return to pre-COVID-19 practices. Companies investing in enterprise-wide digital initiatives saw these "payoffs" in the early pandemic environment. For more information about WS2 powder, please feel free to contact us.