It is an innovative transparent semiconductor function material of the n-type with high bandgap and low resistivity. This has been extensively used in optical electronics, gas sensors and catalysts.
Indium Oxide In2O3 powder:
Indium oxide
This is an amphoteric oxygen of indium. The molecular formula for it is
In2O3
. It is either a light yellow or white amorphous product, heated to make it reddish-brown.
Indium oxide
A new, transparent n-type semiconductor functional material with a width disabled bandwidth, smaller resistivity, and greater catalytic activity. This material has been extensively used in optical field, gas sensors and catalysts. There are also functions such as the indium oxide particle sizes, surface effect and small dimensional effects, as well a macroscopic quantum tunnel effect.
Indium oxide
This is a low-cost, oxidized oxide that has been dissolved in hydrogen. High temperatures are required to separate the low-level oxygen. Additionally, it reacts with metal indium insoluble in acid at high temperatures. The more complicated it is, the faster it disappears. The production of metal indium occurs when hydrogen can be reduced through heating with hydrogen.
Indium oxide
Crystalline oxides cannot be dissolved in water, but are insoluble in it. Two phases of the crystals can be divided: diamond type (cylindrical) and corundum. There is a 3eV bandgap in between the phases. You can find the information box that lists the parameters of each cubic phase. Rhombic phases are produced at high temperatures. They are produced by a non-balanced growing method. Its spatial number R3C is 6. Piersson symbol HR30, A= 0.5487, B= 0.5487, C= 0.57818, z= 6, and the calculation density is 7.31g/cm3.
A magnetic semiconductor is indium mixed with indium film. It has a one-phase crystal structure. The material in the rotating Syringe can also be found in the spinning electronics.
Films made of indium oxide polycrystalline
Zn doped with Zn has high conductivity (conductivity of 105 S/m), even though it is more superconductive at higher temperatures in helium. The film structure and doping are both factors that influence the superconducting temperature Tc. It is lower than 3.3k.
To receive the latest information, send us an inquiry
Indium Oxide
Prices
Please fill out the form below if you wish to
buy Indium Oxide In2O3 Powder
In bulk.
Indium Oxide In2O3 Pulp Performance:
Heating to 400 500 in presence of hydrogen, or another reducing agent, can lead to the formation of metal indium and low-cost Indium oxide.
At high temperatures, it can decompose to lower oxides. At high temperatures, In2O3 can react with indium metal. While In2O3 from low-temperature combustion is readily soluble in acids, more extensive high-temperature treatments make it more difficult to dissolve and cause hygroscopicity. Indium trioxide can be reduced to hydrogen by red heat. This is how metal indium is created.
Technical Parameters of Indium Oxide Powder In2O3:
|
ITEM
|
SPECIFICATIONS
|
TEST RESULT
|
|
Appearance
|
Powder Light Yellowish
|
Light yellowish powder
|
|
In2O3(%,Min)
|
99.99
|
99.995
|
|
Impurities(%,Max)
|
|
Cu
|
|
0.8
|
|
Pb
|
|
2.0
|
|
Zn
|
|
0.5
|
|
Cd
|
|
1.0
|
|
Fe
|
|
3.0
|
|
Tl
|
|
1.0
|
|
Sn
|
|
3.0
|
|
As
|
|
0.3
|
|
Al
|
|
0.5
|
|
Mg
|
|
0.5
|
|
Ti
|
|
1.0
|
|
Sb
|
|
0.1
|
|
Co
|
|
0.1
|
|
K
|
|
0.3
|
|
Other Index
|
|
Particle Size (D50)
|
|
3-5mm
|
It is simple.
Indium Oxide In2O3 Powder
produced?
1. You can burn the indium metal in the air, or you can calcine it to create In2O3 and In2O3. Finely controlling the reduction conditions will produce the In2O3 high-purity. You can prepare the indium trioxide ceramic paste with a 20nm average size by spray burning.
2. Indium hydroxide can be burned in order to produce indium trioxide. If it's heated too hot, In2O3 may undergo thermal decomposition. However, at a low temperature, complete dehydration will not occur. The oxide produced has an hygroscopic quality. Heater temperature and heat time are critical factors. Because In2O3's melting point is very low, it needs to be maintained in an oxidizing environment.
3. For Indium hydroxide, it is first burned in air at 850 degrees to produce In2O3. Then the indium hydroxide will be heated for 30 minutes at 1000 degrees. Indium trioxide can also be made by burning other indium substances, like indium carbonate or indium sulfate in the air.
Applicaciones
Indium Oxide In2O3 Powder:
Indium oxide has been widely used in the military, high-tech and scientific fields of photovoltaic industry, especially in making transparent electrodes.
It is used for producing a liquid crystal display with an inverter.
It is also used in electronic components, such as spectral purity agents and indium oxide.
The protective coating on a metallic mirror surface is made of indium oxide. Additionally, a photovoltaic LCD semiconductor film is used to create indium salts.
It is an indium oxide raw material that is used in resistance touch screens. This includes fluorescent screens, glass and ceramics as well chemical reagents.
Non-ferrous metals glass can be used in ceramics, alkaline Manganese batteries and the Liu series of Indium Oxide. Chemical reagents are also available.
There are a few types of oxidides that can be used in batteries and thin-film, infrared reflectors (highmirrors), as well as some optical coatings.
The combination of tin and indium dioxide forms indium tinoxid, also known as mix indiumoxide or ITO. It is also referred to transparent conductive coating.
Indium oxide, a N-type semiconductor for the resistance element can be used in semiconductors.
Indium oxide can be used in certain dyeing formulas for histological research.
Indium Oxide In2O3 powder Storage:
Indium Oxide In2O3 powder should be kept in a dry, cool, and sealed environment.
Shipping and Packing of Indium Oxide Powder In2O3:
You can pack it in two plastic bags with the inside.
Packing of indium oxide In2O3 powder, vacuum packaging, 100g to 500g or 1kg/bag at 25kg/barrel. Or as you request.
Indium Oxide Powder Shipping:
can be shipped by sea, air or express, once the payment has been received.
Seguesec advanced materials Nano Technology Co. Ltd. (Seguesec), is a trusted supplier and manufacturer of chemicals and Nanomaterials. With over 12 year experience, Seguesec has been providing high-quality chemical products.
You can contact us to request high-quality
Indium Oxide powder . (
brad@ihpa.net)
0086-0379-64280201
brad@ihpa.net
skype
whatsapp