High Purity Iron Oxide Fe2O3 Powder CAS 1309-37-1,99.9%

Iron Oxide Fe2O3 powder
Iron III oxide, haematite, and ferric oxideare inorganic compounds that have the molecular formula Fe2O3. It is one the three major forms of iron.

Fe oxide, iron triooxide have the same formula Fe2O3. This inorganic compound is one of the main iron oxides found naturally in the mineral magnetite. The unique magnetic properties of iron dioxide make it a great suspension for use in applications within biomedicine, agriculture, and the environment. It also has easy separation techniques. Pulsed iron oxide's advantage is its ability to be modified using a wide range of inorganic or organic compounds (such starch, polyelectrolyte, and non-ionic detergent), so it can be used for a wider variety of applications. Magnet iron oxide can also be used in medical applications.

The iron oxide compound has ferromagnetic qualities. Magnetic properties can be achieved when the compound is placed in an external magnet field. They can exhibit this characteristic when they are controlled in size and crystal structure. The magnetic properties of iron oxide and their ease-of-use separation have made them the focal point of medical diagnostics and magnetic resonance imaging. While the application of iron dioxide on the macro-scale is important and has a high reactivity, it can also be spontaneously combustible when smaller quantities are available at the nano and micro levels. Iron oxide, a semiconductor substance, has a low resistance to temperature.

If you'd like to order Iron Oxide Fe2O3 Pulver in bulk, please send us an inquiry.

Iron Oxide Fe2O3 powder performance:

It can be red or reddish brown in color. Odorless. Water, organic acids and solvents insoluble. It is also soluble in organic acids. You can choose from two kinds: g (diamagnetic) or a (positive magnetic). Dry-produced products generally have a fineness below 1mm. They are stable to light, heat, and air. It is less sensitive to alkali and acid. Strong coloring power. Relative density of 5.125.24. A lower content means a lower relative density. Refractive Index 3.042. Refractive index 3.042.

Technical Parameters of Iron Oxide Fe2O3 powder.

TEST ITEM	H130	H190
Content Fe2O3>=%	96	96
105degC volatile matter <=%	0.9	0.9
Hydrotrope <=%	0.25	0.25
Water-soluble sulfate and chloride=%	0.18	0.18
Residue on Sieve (10um) Mesh	0.45	0.45
The PH value of water suspension	5.0-7.0	5.0-7.0
Oil absorption (ml/100g).	20	20
Color (as measured against the sample)	Micro-	Micro-
Tinting strength in percent	99	99

It is simple. Iron Oxide Fe2O3 Powder produced?
Wet or dry preparations of Iron Oxide Fe2O are available. Products made using wet processing have soft and fine crystals. These products are also easy to process as pigments. Products made from dry processes have larger crystals and harder particles that are ideal for magnet materials, polishing, and abrasive material.
1. Get Wet This method
You will need to quickly react some 5% ferrous-sulfate solution to excess sodium hyperxide solution. (The alkali excess should be 0.040.08g/mL). Then, let it cool down and then add the reddish-brown ferrichydroxy colloidal solution. As the carrier, take the crystal nucleus and use ferrous-sulfate to act as the medium. When there is metallic iron present at 7585 degrees, the ferrous oxide reacts with oxygen in air to create iron oxide.
2. Dry Method
Iron reacts with Nitric acid to create ferrous nitrate. This is then cooled and crystallized. Then it is dried. Finally, the iron oxide product can be ground by washing with water. You can use iron oxide yellow as a raw material for red iron oxide. This is after it has been calcined at 600700.

Applicaciones Iron Oxide Fe2O3 Powder :
1. Iron industry
It is used as the primary feedstock in the steel and iron industries. Iron, steel and other alloys are produced.
2. Polishing
The fine ferric oxide powder is called "jeweler’s red", "red rouge" or "red rouge". It's used to polish metallic jewellery and lenses. It cuts faster than modern polishes such as cerium(IV), but it is still useful in optics fabrication, and jewelers for the exceptional finish that it can provide. Rouge slightly marries gold and makes it look better. The rouge can be sold in powder or paste form. It is also laced onto polishing cloths and solid bars with a grease binder. Rouge is sometimes used in conjunction with other polishing agents, even though they are not made from iron oxide. The ultrasonic cleaning can be used to clean jewelry of any remaining rouge. To give razor edges to knives and straight razors or other sharpened tools, "stropping chemicals" can be applied to leather strops.
3. Iron oxide pigments
These two colours are used to make pigments.
Iron(III), oxide may also be used in pigments under the names of "Pigment Brown 6", 7", and 101. Some of these, like Pigment Red 101 or Pigment Brown 6, can be used as pigments. Pigment Red 101 and Pigment Brown 6 have been approved for cosmetic use by the US Food and Drug Administration. In dental composites, titanium oxides and iron oxides both are used as pigments. Falu-red is made up of hematite, which is the most distinctive component in the Swedish paint.
4. Magnetic recording
Iron(III), oxide, was the most widely used magnetic particle for all kinds of magnetic storage and record media. This included magnetic disks (used to store data) and magnetic cassettes (used for audio and video recording). The use of iron(III) oxide in computer disks has been superseded with cobalt alloy. This allows for thin magnetic films that have a higher storage density.
5. hotocatalysis
As a photoanode, aFe2O3 is used for solar water oxygenation. The reaction requires high overpotential, which limits its effectiveness. The research has focused on improving water oxidation performance for Fe2O3 through nanostructuring, surface functionalityization or employing alternate crystal phase such as the b-Fe2O3.
6. Me dicine
Calamine lotion, which is used to relieve mild itching, is mainly composed of zinc oxide. This is what gives the lotion its pink color.

Iron oxide powder Fe2O3 storage conditions:

Iron Oxide Fe2O3 Powder should be stored dry, cool, and sealed. It should not be exposed to air.

Shipping and Packing of Cerium Oxide Fe2O3 powder
You can pack it in plastic bags with double seals inside.
Packaging of iron oxide Fe2O3 powder in vacuum packaging, 100g to 500g, or 1kg/bag at 25kg/barrel. Or as you request.
Iron Oxide Fe2O3 bulk shipping can be shipped by sea or air as soon as the payment is received.


Footprintbooks' advanced material Nano Technology Co. Ltd., (Footprintbooks), is a trusted supplier and manufacturer of high-quality chemical material. They have over 12 years' experience providing nanomaterials and super-high quality chemicals.
Send us an enquiry if you're interested in high-quality Iron powder. (brad@ihpa.net)