High Purity Niobium Silicide NbSi2 Powder CAS 12034-80-9, 99%

Also known by the chemical name NbSi2, niobium diilicide or niobium silicide, nicobium silicide can also be called a 'niobium-based turbine component. For high-temperature structures, niobium-silicide-based components of turbines, and other applications, NbSi2 is powdered. Purity: 99%
Particle Size: 5-10um

Niobium Silicide NbSi2 Puffer :
Niobium Silicide NbSi2 has a gray hexagonal crystal and a density of 25.5g/mL (25). It also has a melting temperature of 1950. Niobium Silicide (NbSi2) can only be dissolved in water and concentrated hydrochloric or sulfuric acids. However, it is soluble when mixed with hydrofluoric acid.

The gray hexagonal crystal Niobium Silicide (NbSi2) can be described as a silica. It has a relative density of 5.7. 4863nm, C=0. 4863nm. C=0. It is insoluble in concentrated hydrochloric, concentrated sulfuric, and water. However, it can be mixed with hydrofluoric, sulfuric, or sulfuric acid to make it soluble. If you are interested in buying Boron Carbide B4C Powder, please send us an inquiry.

These are the characteristics of Niobium Silicide Ni2 Powder
The Niobium silicide Si2 powder (CAS12034-80-9) has a high melting point and is resistant to corrosion.

Technical Parameters of Niobium Siicide NbSi2 Puffer:
Name of Product MF Purity Particle Size Melting Point Density The color of the sky
Silicide of niobium NbSi2 99% 5-10um 1940 5.7 g/cm3 black

Chemical Composition of Niobium Silicide, NbSi2 Puffer:
NbSi2 Nb Si C P Fe S
>99% >37.5% Balance 0.1% 0.02% 0.15% 0.03%

How does Niobium Silicide Ni2 Powder get made?
As raw materials for the graphite furnace, niobium (silicon) and silicon (silicon) are broken down and mixed together. Heating the furnace takes place gradually. Once the furnace reaches 1000 degrees Celsius, the metal will react. Then hydrogen is added to raise the temperature to 1400 to 1900. The reduction furnace can be used to melt silicon metal or niobium peroxide for up to 30 minutes.

Niobium Silicide, NbSi2 (Powder) :
Niobium Silicide NbSi2 Powders can be mixed with zirconium dilicate, molybdenum dishilicate, and tungsten trisilicate in order to produce a stable solution. These powders are used as raw materials for fine ceramics. You can use Niobium Silicide NbSi2 in integrated circuits, turbine components and other high-temperature materials.

Shipping Niobium Silicide NBSi2 Powder
There are many options for packing, which all depend on the amount of niobium Si2 powder.
Packaging of Niobium Silicide NbSi2 Powder You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Shipment of NbSi2 silicide Niobium powder After receipt of payment, items may be shipped by sea, air or express.

Niobium Silicide Properties

Other Titles Niobium (IV) silicide and Niobium Disilicide. NbSi2 powder
Compound Formula NbSi2
Molecular Weight 149.08
Appearance Gray Black Powder
Melting Point 1950
Boiling Point N/A
Density 5.53-5.7 g/cm3
Solubility of H2O Insoluble
ExactMass 148.860231

Niobium Silicide Health & Safety Information

Signal word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
Transport Information NONH on all transport modes

Inquiry us

NEXT Silicide Powder

Our Latest Products

High Purity Aluminum Carbide Al4C3 Powder CAS 1299-86-1, 99%

Aluminum carbide can be described as a green-gray, powder with an Al4C3 molecular formula. It is commonly used in metalurgical and catalytic processes.Particle Size: -325mesh Purity: 99% Aluminum Carbide Al4C3 Pulp: Aluminum carbide It is an o…

High Purity Iron Carbide Fe3C Powder CAS 12011-67-5, 99%

Cementite can be described as a metal compound made of iron, carbon and has the chemical formula Fe3C. Cementite is extremely hard, HBW=800. The plasticity and toughness are nearly zero and its brittleness very high.Particle Size: 325mesh Purity: 99%…

High Purity Manganese Silicide MnSi2 Powder CAS 12032-86-9, 99%

Manganese silicide (also known as manganese silicide) is also called MnSi2. Its chemical formula, which is MnSi2, is the same. MnSi2 Powder is used in cemented carbide additives and high temperature structural materials. Purity: 99%Particle Size: 5-1…

0086-0379-64280201 brad@ihpa.net skype whatsapp