High Quality EBS Ethylene Bis Stearamide Emulsion

EBS Ethylene Bis Stearamide Emulsion has a white emulsion. It is safe for the environment, is not toxic, isn't polluting and is non-hazardous. This product can be used to make inks, paints, and leather coatings. Particle Size: D50: =2mm

Product name: Ethylene bis stearamide emulsion

Formula: C38H76N2O2

Products property This product was produced using modern technology. The appearance of the product is white emulsion. This product is not toxic, polluting, hazardous, or harmful to the environment. The product is very easy to disperse into water. It has a low viscosity and ultra-fine texture.

EBS Ethylene bis Stearamide Emulsion :
EBS Ethylene Bis Steramide is a cream-colored lotion. Ebs Ethylene Bis Steramide, a high-melting point white wax with a very hard melting point, is nontoxic. The industrial products have small yellow particles. They are stable in water and acid-base solvents. This powder contains soluble hydrocarbons as well as aromatic hydrocarbon solvents. The compound has a wettability of 80°C or more.
EBS stands for Ethylene-bis Steramide. This synthetic wax has a high melting point and is highly compatible with most thermoset thermoplastics. The best pigment dispersants for the finished product are the outer and lubricants.
Ebs Ethylene Bis Steramide a plastic lubricant is new and widely used in PVC products. The lubricants such a polyethylene wax and stearate have poor external lubrication. However, they also provide good internal lubrication. Plastic molding is improved by this. The result is a higher yield in plastic processing, reduced energy consumption, and a product with incredibly smooth surfaces. Send an inquiry for the most current price to purchase bulk EBS Ethylene Bis Stearamide Emulsion.

Ethylene Bis stearamide emulsion properties:
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally friendly, and non-toxic. It can be easily dispersed in water.

It is simple. EBS Ethylene Bis Stearamide produced?
You can divide EBS's synthesis technique into 4 routes.
Combining stearic acid and amine compounds
Reacting with an amine compound to the stearate react is called "The stearate"
The hardy amine and chloride compounds are not recommended.
Hydrolysis of the nitrile.
First and second are most common. The first is the most common. It is straightforward, requires no reaction conditions, has three disruptions but is low in purity. Although the EBS is large, the energy consumed is substantial, the process can take a while and is lengthy.

Use of EBS Ethylene Bis Stearamide Emulsion :
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-polluting. It can be easily dispersed in water.
1.Plastic
There are many types of thermoplastic and thermoset polymers that can be used as sliding agents. These include ABS, PS and AS. They also come in PP, PVAC and Cellulose. Accurate, Accurate and Nylon. Amino plastics, Phenolic resin, and amino plastic have excellent finishes.
An auxiliary agent can also be used as an internal release agent in thermoplastic PUR molding. The amount of the agent is between 0.1 and 1%.
Polymethylene gulf agents add 0.5% of additional, increasing melt flow rates and whiteness. The thermal stability and physical indicators for polyoxymethylene also increase.
2. Rubber
EBS, synthetic rubbers, and polychloroprene (SBR) include 1 to 3 percent EBS in the emulsion. They have excellent anti-sticky and anti-blocking abilities. EBS is also applied to automotive flooring mats, drain pipes, and other rubber products. This has an added effect on surface gloss.
3. Chemical fiber
EBS increases the heat resistance, fluidity, and antistatic properties of polyamide, polyester, and other fibers.
4. Type
Casting sand can be added to a phenol-based resin in order to include EBS as an example agent.
5. Pigment, filler dispersant
EBS can be used as a plastic. Chemical fiber parent: ABS, PS. Polypropylene. Polyester pellets.
EBS can be used to color plastics with a spread of powdered EBS.
The pigment filler amount determines how much is added.
6. Powder coating
EBS can also be used to aid in the preparation of powder coatings.
7. Coatings, inks
To improve the performance of paints and paints, you can add 0.5% - 2% EBS.
You can use it in furniture polishing agents or printing inks.
8. Uses other than those listed
The melting point of petroleum products
Metal wire; Lubricants and Corrosive Agents. Potting materials for electric components.
Below the papermaking agent, and above the paper coating components
You can dye textile dyeing as both a dyeing engineer defoamer or a permanent water-drawing agent.
You can add this product to asphalt. This will lower the asphalt's viscosity and improve its weather resistance.

Technical Information of Ethylene bis Stearamide Emulsion

Product EB-20
Solid content. % 20+-2
Cps, viscosity <=100
Particle Size D50 <=2um
PH 7-9

Shipping and Packing of Ethylene bis stearamide emulsion
There are many options for packing depending on Ethylene Bis Stearamide Emulsion quantities.
Ethylene Bis Stearamide Emulsion packing: 25kg per barrel, or at your request
Ethylene Bis Stearamide Emulsion shipping: Could be sent by sea, air, or express once payment receipt is received.

EBS Ethylene Bis Stearamide Emulsion Properties

Other Titles 1,2-Bis(stearoylamino) ethane N,N'-1,2, Ethanediylbisoctadecanamide,
N,N'-Ethylenedi(stearamide), Ethylene distearylamide
N/A
Compound Formula C38H76N2O2
Molecular Weight 593.038 g*mol-1
Appearance Crystals of white, waxy color
Melting Point 144-146°C
Water Solubility N/A
Density N/A
Purity N/A
Particle Size D50: <=2mm
Boling point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact N/A
Monoisotopic N/A

EBS Ethylene Bis Stearamide Emulsion Safety & Health Information

Safety Notice Alert
Hazard Statements H315, H319, H335
Flashing Point 280 degC
Hazard Codes T
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

Our Latest Products

High Purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%

The electrical conductivity of titanium silicon carbide (Ti3SiC2) is high. Purity: 99%Particle Size: 325 Mesh About Titanium Silicon Carbide T3SiC2 Ti3SiC2 Puffer: Titanium carbide, with its chemical formula Ti3SiC2, is a metal- and ceramic-co…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

A metal carbide, Niobium Carbide Powder has the chemical formula NbC. A green cubic crystal with metallic shine, Niobium caride belongs to the sodium-chloride cubic crystal group. Purity: 99.5%Particle Sizes: 2-6um and 1um About Niobium Carbide…

High Purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%

Antimony triselenide (Sb2Se3) is a chemical compound that crystallizes inside an orthorhombic area group. Sb2Se3 is remarkably similar to the topological insulator Sb2Te in terms of physical and structural similarities. Particle Size: powder, -100 me…

0086-0379-64280201 brad@ihpa.net skype whatsapp