High Quality Stearic Acid Amide Emulsion

A white stearic acidamide-amide emulsion can be used. The product is environmentally friendly, nontoxic, polluting and non-hazardous. It can be used in paints, inks, and leather coatings. Particle Size: D50: =2um

Stearic Acid Amide Emulsion:
Stearic acidamideamide, a white emulsion that is not toxic, polluting, hazardous, or environmentally harmful, is a non-toxic product. The product can be easily dispersed in water, has low viscosity and is highly dispersible.
Stearamide may also be known as stearamide. Its chemical composition is C17H35CONH2. Stearic acidamideamide is insoluble when mixed with water. It can be slightly soluble at room temperature in organic solvents. It is able to improve dispersion effects and the affinity of dyes.
Excellent adhesion and lubricity. No moisture absorption. You can mix it with paraffin wax. Ammonium salt is created by the reaction between stearic and ammonia. It then gets dehydrated to get the final product. It is a good, smooth product that has low hygroscopicity. Use it as a pigment ink mixed agent, surface-active and fiber oil agent.
The use of stearamide in thermal paper coatings can serve as both a sensor and slip agent, and as an anti-blocking and slip agent for polyolefin films. The base of stearates is fatty saturated linear monocarboxylic oils derived from natural vegetable oil. Send an inquiry for the most current price to purchase bulk Stearic Acid Amide Emulsion.


The properties of Stearic Acid Amide Emulsion
A white stearic acidamide-amide emulsion can be used. The product is environmentally friendly, safe, clean, non-polluting and non-hazardous. It can be easily dispersed in water.

Technical Information of Stearic Acid Amide Emulsion:

Solid content 25+-2
Viscosity,cps

<=250

Particle Size D50 <=2um
PH 6-9


How does Stearic Acid Amide Emulsion get made?
Insoluble in water, stearic Acid amide must be prepared using emulsifiers. Even after adding dispersant, water-based stearic Acid amide emulsion is still not able to disperse well. Additionally, it can easily precipitate. Long-term storage may result in flocculation. Additionally, high-speed stirring is required and the grinding must be done under heat. The production costs are high.

First, add the water-based water-basedstearic Acid amide to water. Next stir for 60 minutes at 2500r/min. Then add the defoamer (preservative) and continue stirring for another 40 min. This will produce an aqueous solution of stearic Acid amide. This prepared water-based, stearic-acid amide-amide emulsion contains 41.7% solids. It has a viscosity level of 146 mPa*S. After 30 minutes of centrifugation at 20000r/min, the water-based, stearic-acid amide-amide emulsion can be placed at 20-25C for 3 months. There was no flocculation or delamination.

Stearic Acid Amide Emulsion:
Stearamide can be used to lubricate and release molds for polyvinylchloride, polystyrene, and other plastics.
Stearamide is often used with oleamide-erucamide as an antiblocking agent to polyolefin film films.
Stearamide, unlike the common inorganic anti-blocking agents (silica), does not affect the transparency. Stearamide is used to release synthetic rubber, natural rubber, and as a lubricant for rubber compound processing. This gives it a high Gloss.
The sensitizer of thermal paper is made from stearic Acid amide Ultrafine Aqueous Dispersion.
The ultra-fine, water-based, stearic Acid amide Dispersion is used for textile waterproofing, fabric softener and antistatic agent. It also serves as an adhesive, fixative, and wetting aid.

Shipping and Packing of Stearic Acid Amide Emulsion
You can choose from many kinds of packing depending on your stearic Acid amide Emulsion Quantity.
Packaging of Stearic Acid amide Emulsion: 25 kg/barrel
Emulsion shipment of Stearic Acidamide Amide Could be sent by sea or air as soon as possible after receipt of payment.
Stearic Acid Amide Emulsion, Stearic Acid supplier, Stearic Acid storage

Inquiry us

Our Latest Products

High Purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%

The electrical conductivity of titanium silicon carbide (Ti3SiC2) is high. Purity: 99%Particle Size: 325 Mesh About Titanium Silicon Carbide T3SiC2 Ti3SiC2 Puffer: Titanium carbide, with its chemical formula Ti3SiC2, is a metal- and ceramic-co…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

A metal carbide, Niobium Carbide Powder has the chemical formula NbC. A green cubic crystal with metallic shine, Niobium caride belongs to the sodium-chloride cubic crystal group. Purity: 99.5%Particle Sizes: 2-6um and 1um About Niobium Carbide…

High Purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%

Antimony triselenide (Sb2Se3) is a chemical compound that crystallizes inside an orthorhombic area group. Sb2Se3 is remarkably similar to the topological insulator Sb2Te in terms of physical and structural similarities. Particle Size: powder, -100 me…

0086-0379-64280201 brad@ihpa.net skype whatsapp