High Purity Telluride Copper CuTe Powder Cas 12019-23-7, 99.9%

Telluride (Cupper(II) Telluride) is a dark powder that is very stable when stored at room temperatures. Particle Size: -80mesh and -100mesh
Purity: 99.99%

Telluride Copper CoTe Powder -
Telluride copper also known as alloys C15400 and C15400 semi shared tellurium and TEU- is a copper-based alloy containing different amounts of tellurium. Tellurium usually has a content of 0.4-0.7%, and phosphorus can be anywhere from 0.04 percent to 0.12 percentage.

Copper tellurium can be described as an alloy made of copper tellurium. Copper tellurium containing 0.4-0.7% tellurium has good machinability. The master alloy is telluride copper, which contains half the amount of copper and half the percent of tellurium.

Tellurium Copper has the following properties: atmospheric corrosion resistance; high temperature and conductivity hydrogen embedment (i.e. caused by the introduction or diffusion of hydrogen fracturing, weaken), 65-130HV hardness; good formability (if free cutting Brass for 100), 85-90% of machinability rating, suitable for welding and brzing. However, it is not suitable to be used for any specific welding process such as resistance welding, oxide-acetylene welding, spot welding, coating metal welding

It is a copper alloy with excellent machinability and high electrical and thermal conductivity. Copper tellurium alloy is known for having the best cutting performance. It is able to be cast, extruded, drawn, blanked, and molded. The tellurium copper alloy can be made into plate, sheets, rods, wires, tubes, and many other forms. It is ideal for industrial use due to its properties. If you are interested in Telluride Copper CuTe Powder, please send us an inquiry.

Telluride copper cuTe powder performance:

Copper telluride can be described as a chemical substance having the molecular structure CuTe. Copper telluride can be described as a dark powder. It is very stable in ambient air and at room temperatures. Copper telluride, an inorganic mineral that is important for storing copper and tellurium resources, can also be stored as a great way to do so. Cu is used to replace Te in H2SO4 solutions. Copper telluride can be produced by replacing Te. It separates tellurium form many metalions and gives rise to a very high concentration. Te can either be + 4 or 6 valences when it replaces Te. These can all generate Cu 2 Te. This is because Te isn't affected by the tellurium valence. Cu telluride, when exposed to an acid or base, can react chemically with these acids and bases. This is the key for seperating and recovering Cu and T. To put it simply, copper and tellurium combine at a higher temperature in order to separate the tellurium.

Telluride copper cuTe powder specification :

Room temperature stable at room temperature, black crystal powder. Copper telluride, an important organic material that stores large amounts of tellurium as well as copper resources, is also an important one.

Copper Telluride Certificate (ppm)
Purity Zn Ag Cu Al Mg Ni Pb N Se Si Cd Fe As
>99.99% <=5 <=4 <=5 <=3 <=5 <=5 <=5 <=5 <=6 <=4 <=8 <=8 <=5

You can order different products depending on your requirements.

How does Telluride Copper CopperCuTe Powder be made?
These steps are part of a preparation process for copper tellurium alloys:
1. After mixing high-purity copper and high purity tellurium according the required ratios, or after creating layers of high pure copper and high quality tellurium respectively, the materials are put in a graphitecrucible. The graphitecrucible is then sealed, after which the protective gas in the graphitecrucible has been replaced with air.
2. The graphite crucible can be placed in a synth furnace. After it is closed, the oxygen from the furnace chamber is transferred into the protective gases.
3. To ensure that the furnace is at 1.04.5MPa, add protective gas. However, in addition to the heating of the furnace, the temperature rises within 60 minutes from normal to 12001450. The temperature also drops after 24h.
4. After the temperature has been lowered to less 100F, the protective gas is removed from the synthesis oven to bring the pressure to normal. Finally, the furnace can be opened for the production of copper tellurium alloy ingot.

Telluride Copper Copper CuTe Powder -
Tellurium copper alloy is used primarily for: High conductivity, high resistance to corrosion of precision electronic parts and electric components, advanced mechanical parts and electrical parts.
The tellurium copper alloy is available in a range of profile options, including sheet, plate, rod and wire.
Indicators for contact material of charging piles were developed in the wake of the promotion and construction of new energy vehicles. Due to its high electrical qualities and ease of processing, copper tellurium can be successfully used as a high-current connector for new energy vehicle.


Packing & Shipping Telluride copper cuTe powder -
There are many options for packing depending on Telluride copper cuTe powder.
Telluride copper cuTe powder packaging: vacuum packaging, 100g, 500g, 1kg/bag or 25%/barrel. Or as you request.
Shipping to Telluride Copper CuTe Powder: can ship by air or sea as soon after receipt of payment.

Cuprous Telluride Powder Properties

Other Titles Telluroxopper and Copper monotelluride.
Copper (2+) telluride
12019-23-7
Compound Formula CuTe
Molecular Weight 191.15
Appearance Crystalline
Melting Point 1125 degC (607 degF)
Solubility In Water N/A
Density 7.1 g/cm3
Purity 99.00%
Particle Size -80mesh, -100mesh
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young’s Module N/A
Exact 192.836
Monoisotopic 192.836

Cuprous Telluride Pulp Safety & Health Information

Safety Notice N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

Our Latest Products

High Purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%

The electrical conductivity of titanium silicon carbide (Ti3SiC2) is high. Purity: 99%Particle Size: 325 Mesh About Titanium Silicon Carbide T3SiC2 Ti3SiC2 Puffer: Titanium carbide, with its chemical formula Ti3SiC2, is a metal- and ceramic-co…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

A metal carbide, Niobium Carbide Powder has the chemical formula NbC. A green cubic crystal with metallic shine, Niobium caride belongs to the sodium-chloride cubic crystal group. Purity: 99.5%Particle Sizes: 2-6um and 1um About Niobium Carbide…

High Purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%

Antimony triselenide (Sb2Se3) is a chemical compound that crystallizes inside an orthorhombic area group. Sb2Se3 is remarkably similar to the topological insulator Sb2Te in terms of physical and structural similarities. Particle Size: powder, -100 me…

0086-0379-64280201 brad@ihpa.net skype whatsapp