15-5 is used widely in 3D-printing thin-walled devices, complex parts, cold and hot spraying, laser coating, and biomedical applications.

About the 3D Printing 15-5 Stainless Steel Powder: Stainless 15-5 metal powder can be used for 3D printing of thin-walled parts and devices, cold and hot spraying, laser cladding and biomedical applications. Stainless Steel 15-5 PH, a martensitic hardened stainless, is a good choice for applications that require high strength and corrosion resistance at temperatures as high as 600degF (316degC). It has excellent mechanical properties and is tough in both the longitudinal and cross-sections of the base material and welds.
This stainless steel is pre-alloyed and fine powder. This steel has excellent corrosion resistance, and good mechanical properties. This type is used widely in medical, aerospace, engineering and other applications requiring high hardness, strength, and corrosion resistance.
In metal injection molding, precipitation hardening is the most commonly used alloy. Cu tends to evaporate when sintering, which is a potential disadvantage of 17-4PH. It may be necessary to clean the oven regularly in order to prevent cross-contamination. The current study of 15-5pH has been initiated in part with this aspect in mind.
It is a martensitic, precipitate-hardened stainless alloy containing 15 chromium. It has a high degree of strength, hardness, and corrosion resistance. Heat treatment at low temperatures can increase the strength. It is stronger and more malleable than 17-4 pH. It is easily welded. It can be used in this level for any thermal condition. If you are interested in purchasing 3D Printing Powder Stainless Steel Powder, 15-5, in bulk quantities, please send us an inquiry.

Category of Stainless Steel Powders:
Alloy grades & Characteristics
Alloy number of Stainless Steel steel powder
Stainless steel:304,316L,410L,15-5PH,17-4PH,2Cr13;
High-strength steel:A100,300M,30CrMnSiA,40CrMnSiMoVA;
Work die steel:18Ni300,H13,M2,M35,M42,T15,2030,S390
Iron Nickel Alloy Powder: Invar 36
The particle size of Stainless Steel powder is:
0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm

Morphology and morphology of Stainless Steel powder
Spherical or near spherical

The appearance and properties of Stainless Steel powder
Grey

Package of Stainless Steel Powder:
Aluminum bag, Vacuum packing

Applications of Stainless Steel Powder
3D printing powder

Other applications of Stainless Steel:
powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.

How does 3D printing powder 15-5 Stainless-Steel Powder get produced?
The 15-5PH stainless is an upgrade of the 17-4PH that was developed in the 1960s. This finer structure was achieved by the remelting procedure. This delicate structure increases the material's strength. The material has excellent corrosion resistance and is low-temperature toughening. It can be processed either in the solution annealing stage or the final heat-treatment state. Heat treatment at different temperatures improves the strength and ductility.
Any conditions are acceptable for processing 15-5PH. The alloy must first be slightly formed under averaging conditions. Then, it is welded by using techniques such as protection fusion or resistance method. The material was heated at 1038degC (1900degF), for 1/2 hour, and cooled down by air. It is then followed by annealing the alloy at 1038degC for 1 hour and cold working.

Applications Stainless Steel Powder 15-5 for 3D Printing
15-5PH stainless may be used for heating or resolving treatment conditions in order to obtain various properties. The stainless steel can be treated in many different ways, but the H1150m treatment conditions provide the best life expectancy.
Applications: aerospace parts, aircraft manufacturing, component manufacturing and other equipment.
Stainless steels 15-5 pH can be used in a variety of other applications.
The marine gas compressor section
Hollow shaft,
Papermill equipment
Engine parts
Aircraft parts
gear
Fittings & fasteners
Nuclear reactor assembly
Aerospace structural components
The valve
The gear and shaft
Components for oil and gas
Nuclear reactor assembly

Storage Conditions for 15-5 Stainless Steel powder:
As dampness will affect the performance of 15-5 powder and its use, it is important to store 15-5 stainless powder in a dry and cool room. Ti2AlC Powder should not be exposed to stress.

Shipping & Packing of 15-5 Stainless Steel Powder
The amount of powder 15-5 stainless is used to determine the type of packaging.
15-5 stainless powder packaging: Vacuum packed, 100g/bag, 500g/bag or 1kg/bag. 25kg/barrel or as per your request.
Shipping of 15-5 stainless powder is possible by air or sea as soon after payment as possible.

Properties 15-5 Stainless Steel Powder
Alternative Names	15-5 stainless Steel Powder, 15-5 Stainless Steel
CAS Number	N/A
Compound Formula	N/A
Molecular Mass	N/A
Appearance	Grey
Melting Point	N/A
Solubility	N/A
Density	N/A
Purity	N/A
Particle Size	0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm
Bold point	N/A
Specific Heating	N/A
Thermal Conduction	N/A
Thermal Expander	N/A
Young’s Module	N/A
Exact Volume	N/A
Monoisotopic Mash	N/A
Health & Safety Information on 15-5 Stainless Steel Powder
Safety Advisory	N/A
Hazard Statements	N/A
Flashing point	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Declarations	N/A
RTECS Number	N/A
Transport Information	N/A
WGK Germany	N/A

Inquiry us